|
|
|
|
  • 软件名称:基于直升机激光点云的分裂导线重建研究
  • 软件大小: 0.00 B
  • 软件评级: ★★★
  • 开 发 商: 汪骏,夏少波,王和平,王成,谭弘武
  • 软件来源: 《遥感技术与应用》
  • 解压密码:www.gissky.net

资源简介

摘要: 电力线三维模型是输电线路安全和增容分析的基础,机载/直升机激光雷达技术已经成为电力三维模型重建的重要技术手段,但少有研究涉及分裂导线的高精度建模。通过分析分裂导线点云数据的特点,提出一种基于点云分段、聚类分析和曲线拟合的分裂导线精细三维重建方法。最后利用获取的四分裂导线点云数据,考虑实际作业中可能遇到的点云缺失、密度偏低等情况,对算法进行了测试和分析。结果表明:该算法能够自适应地识别点云中分裂导线的数目,分离不同分裂导线的点云,建模结果可以满足输电线路安全分析的要求。  关键词: LiDAR;  直升机电力巡线;  分裂导线;  聚类分析;  三维重建     Abstract: Detecting power transmission lines is useful in the management of power line network.With the increasing applications of LiDAR (Light Detection And Ranging) in the helicopter-based inspection,many studies have focused on the three dimension model of the transmission lines.However,reconstructing the bundled conductors from points cloud is more complex than the non-bundled ones.In this paper,we proposed an automatic algorithm to reconstruct the bundled conductors from the helicopter-borne LiDAR points cloud.The power line is divided into sections along its orientation at first.Secondly,the points in each section are projected onto a principle plane,the clustering is applied in that plane.Thridly,with a clusters merging process,the points from the same bundled conductors in the sections are combined.Finally,the power lines are reconstructed with curve fitting.The algorithm is validated by the points cloud of four-bundled conductors.The results indicated that the proposed method is self-adaptable and effective in bundled conductors reconstruction and the quality of data has low impact on the final results.

下载说明

·如果您发现该资源不能下载,请通知管理员.gissky@gmail.com

·为确保下载的资源能正常使用,请使用[WinRAR v3.8]或以上版本解压本站资源,缺省解压密码www.gissky.net ,如果是压缩文件为分卷多文件,请依次下载每一个文件,并按照顺序命名为1.rar,2.rar,3.rar...,然后鼠标右击1.rar解压.

·为了保证您快速的下载速度,我们推荐您使用[网际快车]等专业工具下载.

·站内提供的资源纯属学习交流之用,如侵犯您的版权请与我们联系.