|
|
|
|
  • 软件名称:基于误差建模的SRTM高程精度提升方法研究
  • 软件大小: 0.00 B
  • 软件评级: ★★★
  • 开 发 商: 曹晓晨,尤红建,刘佳音,王峰
  • 软件来源: 《遥感技术与应用》
  • 解压密码:www.gissky.net

资源简介

摘要: 数字高程模型(DEM)是地理信息系统和遥感等领域所必需的核心数据,已经应用到很多方面。本文提出了一种利用ICESat GLA14数据优化SRTM1数据的方法。首先,根据SRTM误差分布去除GLA14数据中的粗差点,完成坐标基准和高程基准的统一。其次,分析了SRTM误差随坡度、坡向的变化规律,并建立了误差模型。最后,将GLA14数据随机划分为控制点和检查点,使用控制点采用最小二乘法拟合误差,使用检查点评价精度提升效果,并多次重复随机划分的过程,验证算法的有效性。实验结果表明:使用该算法针对不同地区不同地形的DEM进行了实验,均取得了很好的效果。  关键词: DEM优化;  SRTM;  ICESat;  误差模型;  DEM精度     Abstract: DEM has become the kernel data of GIS and remote sensing,and has been applied to various areas.An approach to optimize SRTM1 data using ICESat GLA14 data is proposed in this paper.First,the outliers of GLA14 data is filtered out according to the error distribution of SRTM1 and the coordinate system and height reference of both data is unified.Then,the relationship between the error of SRTM1 and the slope and the aspect of land is analyzed and an error model of SRTM1 is established.Finally,we divide the GLA14 data into control points and check points randomly,use the control points to fit the error model by least square method,use the check points to evaluate the effect of optimization.We repeat the divide several times to prove the effectiveness of our approach.The results of experiment show that our approach has a good effect among different areas and different topography.

下载说明

·如果您发现该资源不能下载,请通知管理员.gissky@gmail.com

·为确保下载的资源能正常使用,请使用[WinRAR v3.8]或以上版本解压本站资源,缺省解压密码www.gissky.net ,如果是压缩文件为分卷多文件,请依次下载每一个文件,并按照顺序命名为1.rar,2.rar,3.rar...,然后鼠标右击1.rar解压.

·为了保证您快速的下载速度,我们推荐您使用[网际快车]等专业工具下载.

·站内提供的资源纯属学习交流之用,如侵犯您的版权请与我们联系.